STOK KOSONG
SANLIDA QUICK DISCONNECT X10
| DESKRIPSI |
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw
STOK KOSONG
SANLIDA QUICK DISCONNECT X10
| DESKRIPSI |
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw
SANLIDA X10 Quick Disconnect - quick release fastener.
Locking system for quick disassembly of monostabilizers or entire stabilizer sets with just one twist. The stabilizer is no longer screwed directly into the Riser, but the X10 Quick Disconnect is used as a connector between the stabilizer and the Riser. Only the locking bolt is attached to the screw of the stabilizer itself, with which the stabilizer is hooked into the quick release and fixed with a quarter turn.
The different angle variants of the quick-release fastener allow the stabilizer to be mounted in an angled position. The 0° variant leaves the mounted stabilizer at a 90° angle to the bow, the 5° and 10° variants leave the stabilizer at an angle of 85° and 80° to the bow respectively.
Suitable for most Risers and Stabilizers.
Technical data:
Thread: 5/16 inch
Angle: 0°, 5° ode 10°
Scope of delivery:
1x quick release fastener incl. screw